2 December 2019
When Australian ship builders Strategic Marine needed to create a world-first for their Dutch customer Rederij Doeksen, they turned to us. The challenge was to design a 70m-long, 17m-wide RoPax ferry that was capable of safely carrying 592 passengers and a mix of cars and trucks to and from the Terschelling and Vlieland islands on the Wadden Sea - the largest tidal flats system in the world and one that extends along the coasts of Denmark, Germany and the Netherlands.
Because of its globally unique geological and ecological value, the Wadden Sea is listed by UNESCO as a World Heritage Site, and it was therefore vital that our design met all of Rederij Doeksen’s exacting requirements whilst making as little impact on the environment as possible.
The project marked a number of significant firsts for both the industry and ourselves. Not only was it our first ever design of a vessel powered completely by liquefied natural gas, but it was also made completely of aluminium. The resulting two catamarans are the first ever single-fuel LNG ferries in The Netherlands and the first ships in the world to boast single-fuel LNG engines directly driving a fixed pitch propeller.
Being the first of their type and built entirely from aluminium posed a number of technical challenges to ensure that the vessels complied with the relevant rule sets and that they exceeded all the required safety standards for vessels of their size, capacity and operational requirements. However, all the challenges were ably overcome by working closely with the customer’s team along with the shipyard, Lloyds Classification Society, the Flag Authority and a host of other major sub-contractors that were associated with the project.
After construction by the Strategic Marine shipyard in Vietnam and delivery to their home port of Harlingen in the Netherlands, the ground-breaking new designs will allow Dutch ferry operators Rederij Doeksen to replace their existing fleet on the same route with new vessels that provide a much more environmentally friendly service along with significantly reduced emissions.
***
This article is part of #BestOfBMT 2019, featuring our best projects throughout the year.
For more information contact: shipdesign.cs@bmtglobal.com
19 May 2023
BMT today announced that it has been awarded a Hydrodynamic Marine Simulator Training contract by the Ministry Of Defence to deliver new, optimal levels of safety, operational efficiency, readiness, and an advanced 5-bridge training platform capability in customised navigation training for the Admiralty Pilots and Tug Masters of the Queen Elizabeth-class aircraft carriers (QECC) in Portsmouth.
27 April 2023
BMT's advanced 5-bridge training platform for Tugs and Ship Pilotage is launched and is already set to support multi-year training programmes with its state-of-art training facility.
11 April 2023
In collaboration with Penguin Shipyard International, the BMT design iteration, called “MFV-R”, is an optimal ship design created to offer a second-generation external firefighting capability that goes ‘above and beyond’ standard FiFi Class 1 requirements.
2 March 2023
We are pleased to announce that our latest 27m CTV hybrid vessel design showcasing our patented BMT Active Fender System® and hybrid propulsion system has been selected by HST Marine for the European offshore wind industry.